|
|
Complete set for benzin-oxygen
cutting "NORD"
|
|
Set "NODR" for
the benzine-oxygen cutting is used for the divided hand-cutting
of carbonic and low-alloy steels in field and industrial conditions
at any time of year (at temperature from +35oC up to -20oÑ). The
time of run-out for working mode does not exceed 4-5 sec. The set
provides economic process of cutting of steel by thickness up to
300 mm. As capacity to combustible gas is applied balloon, equipped
by the valve of dump of superfluous pressure, pump, manometer for
the control of pressure and valve of the termination of submission
of fuel at break of a sleeve or at sharp increase of its efflux.
The design of a mouthpiece allows to carry out the cutting of metal
in high-speed modes, provides high stability to return impacts of
a flame, and also allows to use if necessary as fuel - propane-butan,
and at change of mouthpieces and other combustible gases. Useful
capacity of balloon - 6 litres. |
Thickness of cutting steel, mm |
5 - 300 |
Working pressure,
MPa |
Oxygen |
3 - 10 |
Benzine |
0,5 - 1,5 |
Dimensions |
600x650x170 |
Cosumption of gases |
Oxygen, m3/hour |
2,8 - 28 |
Benzine, A-92 l/hour |
1,0 - 2,4 |
Weight, kg |
11,5 |
|
|
|